Monday, August 23, 2021

LOGO

TP Link Router Login (192.168.1.1) Wireless Router



TP-Link Router Login: The admin panel or control panel of your TP-LINK Router is the web interface of the TP-Link Router. If you want to make any changes to your router’s settings, you first need to access the admin panel of the TP-Link Router. 

 TP-Link Router Login

To do so, you have to login into your TP-Link Router web interface. You can easily log in to the web interface of the TP-Link Router by simply following the below-given steps.

Also Check: how to at router login find default username password

Steps to login to TP-LINK Router:

Step 1: Connect your device to TP-LINK Network:

If you wish to make any changes or configure your router then you must stay connected to its network. You can easily connect to the TP-Link Router via wired medium or Wi-Fi connection. 

TP-LINK Router allows you to connect your computer or smartphone to its network either through a wired or wireless network. We recommend you to connect your device with the router using a wired medium such as an Ethernet cable if you don’t know the Wi-Fi password or you have forgotten the password of the TP-LINK Router. You are not required to enter any password when you try to connect with the router using an Ethernet cable. 

However, if you want to connect using a Wi-Fi connection, you need to know the username or SSID and Wi-Fi key and then try to connect your device to that network. Both of these details that are SSID and passwords usually appear on the label pasted on the front or side of the router.

Step 2: Enter your TP-Link Router’s IP address:

Open Google Chrome browser or any other web browser to login to the admin panel of the TP-link router on your device. And enter the IP address of TP-Link Router in the URL bar of the browser. The IP address is usually common for all TP-Link Routers. However, it is likely to vary for a few models of TP-LINK Router. 192.168.0.1 and 192.168.0.254 are the most common IP addresses for TP-Link router login. 

 TP Link Router Login

Step 3: Enter default login credentials:

Once enter the Link, it will begin to load the login page of the TP-Link Router. Once the login page loads completely, you need to enter the default login information in order to access the control panel. On the login page, you need to enter your current username and password of your TP-link Router if you have changed it.

 login page of the TP-Link Router

If did not change the default username and password, then enter the same on the login page. You can found your TP-link router’s default login credentials on the label pasted underneath or at the side of your TP-Link router. Once you enter your username and password correctly, click on Enter button. That’s all.  The login process of TP-LINK Router was completed and you will see the control panel of the router and you can make any changes to your router’s configurations as you need.

Also Check: Arris Router Login Default Username Password

How to reset TP-link Router:

Follow the below-given steps carefully to initiate the reset process of the TP-link router. No matter how many times you press the reset button, it will be of no use unless you press the reset button at the right time.  Let’s see the steps to reset the TP-Link Router:

reset process of the TP-link router

Step 1: Find the Reset button on the router:

You first need to find the reset button which is usually incorporated at the backside of the TP-link Router. This button is often hidden in a hole to prevent users from pressing incorrectly. The button can also stick out in some models of TP-link routers. In occasional cases, The WPS button may acts also be a reset button when using a reset sequence. Once you found the reset button, move on to the next step to continue the reset process.

Step 2: Press and hold the Reset button of the TP-link router

When your TP-link Router was in powered-on condition, press the reset button and hold it for about 30 seconds. Plug out the power source connected to the router without releasing the reset button and hold the button for 30 more seconds. And then turn on the power supply while still holding the reset button and hold it for another 30 seconds. That’s all. Now you have successfully reset your TP-link Router. Your router now turned to its default settings.

Step 3: Configure your TP-link Router again

If you don’t need to reconfigure your router, you may skip this step. But we recommend making changes with the TP-link router’s password change to protect your connection.

Concluding Words:

So these are the steps to TP Link router login. You have also clearly learned how to reset your TP Link router. The reset of the TP Link router will be more helpful when your router experiencing some issue or if you have forgotten your router’s login credentials.

Related search topics:

  • tp-link login username and password
  • tp-link router login url
  • tp-link account login
  • tp-link router password change
  • d-link router login
  • tp-link router IP
  • 192 l.168.0.1 tp-link
  • login router